IDEAL BURGER PATTY MAKER
IDEAL BURGER
PATTY MAKER
The Ideal Burger Patty Maker is applicable to multiple industries such as; hotels, catering kitchens, food & beverage shops / factories, restaurants, home usage, food shops, snack food shops, meat processing plants, bakeries etc.
The Patties produced are consistent to required diameter, thickness and weight. Patties are firmer and flatter, allowing for even cooking, retaining of juices, time saving and effort saving. The Ideal Burger Patty Maker allows for clean and minimal handling of meat.
The meat is kept fresh and cool once placed in the Ideal Burger Patty Maker and ensures food safety protocol. The Ideal Burger Patty Maker acts as a countertop Burger patty maker. The slider mold is interchangeable and can be supplied to produce a different patty size and weight required.
product features
operating instructions
OI-1. Unpack components from packaging, wash clean and assemble as per illustration.
OI-2. Prepare meat mix or vegetarian mix to required ingredients.
OI-3. Pivot Plunger Assy over 90 degrees away from operator allowing the plunger base to exit the Cylinder Assy.
OI-4. Fill Cylinder Assy with preferred mix – approximate 2 kg per batch.
OI-5. Pivot back Plunger Assy by inserting plunger base into Cylinder Assy.
OI-6. Slide Sizing Slider Assy all the way back until it stops.
OI-7. Note: when Sizing Slider Assy is all the way back the patty cavity will display a small opening in the front area visible to the operator.
OI-8. Apply steady downward force on handle of Plunger Assy to fill patty cavity. The small opening in patty cavity of Sizing Slider Assy will fill with mix when full. Maintain steady pressure on handle of Plunger Assy and pull forward Sizing Slider Assy to extract patty.
OI-9. Note: above sequence may be altered dependent on mix used eg. apply steady downward pressure on handle of Plunger Assy to fill patty cavity. The small opening in patty cavity of Sizing Slider Assy will fill with mix when full. Release pressure on handle of Plunger Assy and pull forward Sizing Slider Assy to extract patty.
OI-10. Ejector Assy may be used to assist to free patty from patty cavity and discharge patty onto Removable Tray.
OI-11. Cellophane patty discs or similar may be positioned onto Removable Tray to stack and separate each patty from the next for storage purposes.
OI-12. Continue to produce patties until mix in Cylinder Assy runs low then repeat from point 3.
OI-13. When complete disassemble, wash clean and store in clean dry area.
step by step
STEP 1: POSITION REMOVALABLE TRAY
There are three slots provided in Base Assy to position Removable Tray at required height spacing between Sizing Slider Assy and Removable Tray. The space between Sizing Slider Assy and Removable Tray from upper to lower slot is spaced at 22mm, 32mm and 42mm.
STEP 2: REMOVE STAR HAND KNOB
Remove Star Hand Knob from Base Assy.
STEP 3: POSITION SIZING SLIDER ASSY
Position Sizing Slider Assy on top of Base Assy and between spacers provided.
STEP 4: POSITION CYLINDER ASSY
Position Cylinder Assy on top of Base Assy and Sizing Slider Assy. Note: align 4 x holes in base of Cylinder Assy over 4 x threaded studs protruding from Base Assy.
STEP 5: FASTEN STAR HAND KNOB
Reposition Star Hand Knob on protruding threaded stud and fasten all assemblies – hand tight.
STEP 6: POSITION PLUNGER ASSY
Position Plunger Assy into Cylinder Assy. Guide Plunger Assy base down into Cylinder Assy.
STEP 7: ALIGN PLUNGER ASSY END
Position Plunger Assy end into Cylinder Assy, ensure holes align.
STEP 8: FASTEN PLUNGER ASSY
Fasten Plunger Assy with removable Lock Pin.
EJECTOR ASSY
Use to aid ejecting patty from Sizing Slider Assy.T
STEP 1: POSITION REMOVALABLE TRAY
There are three slots provided in Base Assy to position Removable Tray at required height spacing between Sizing Slider Assy and Removable Tray. The space between Sizing Slider Assy and Removable Tray from upper to lower slot is spaced at 22mm, 32mm and 42mm.
STEP 2: REMOVE STAR HAND KNOB
Remove Star Hand Knob from Base Assy.
STEP 3: POSITION SIZING SLIDER ASSY
Position Sizing Slider Assy on top of Base Assy and between spacers provided.
STEP 4: POSITION CYLINDER ASSY
Position Cylinder Assy on top of Base Assy and Sizing Slider Assy. Note: align 4 x holes in base of Cylinder Assy over 4 x threaded studs protruding from Base Assy.
STEP 5: FASTEN STAR HAND KNOB
Reposition Star Hand Knob on protruding threaded stud and fasten all assemblies – hand tight.
STEP 6: POSITION PLUNGER ASSY
Position Plunger Assy into Cylinder Assy. Guide Plunger Assy base down into Cylinder Assy.
STEP 7: ALIGN PLUNGER ASSY END
Position Plunger Assy end into Cylinder Assy, ensure holes align.
STEP 8: FASTEN PLUNGER ASSY
Fasten Plunger Assy with removable Lock Pin.
EJECTOR ASSY
Use to aid ejecting patty from Sizing Slider Assy.T